Aug 18, 2020 Format your Western Digital My Passport external hard drive to FAT32 or ex-FAT format so to transfer the data between a Mac and Windows system conveniently. There are specific third-party systems, like Digital Camcorders, and Sony PlayStation 3, which need the drives to be formatted in either FAT32 or ex-FAT format to perform read from. WD My Passport not showing up on Mac. If you are having a similar issue that WD My Passport external or internal hard drive not showing up on Mac, you can try the following tips as listed here for help: （Some are similar as shown on this page) #1. Reconnect WD Passport to Mac #2. Change WD Passport drive letter #3. Remount WD Passport to. Much like my WD My Passport Ultra, most external hard drives out there are customized to work with Windows, not OS X. If you're only going to use the external hard drive with Macs or you want to.
Summary: Is your external drive WD My Passport not showing up on your Mac? Here's how to format a drive to be used on Mac, or repair a corrupted external hard drive. Besides, you can learn how to access the contents on WD My Passport that's not showing up on Mac Desktop/Finder/Disk Utility.
Normally, you will soon see the external drive WD My Passport on the desktop once it's connected to your Mac's USB port. Also, you can see it easily in the Finder. You can find it in the left-hand column under Devices. However, sometimes, it's annoying that your WD My Passport external hard drive doesn't show up in Desktop/Finder or even in Disk Utility.
And besides, there can be a risk that data on the WD My Passport external drive is lost. That means you cannot access the drive and the data on the drive directly. Here will help you trouble shoot the issues step by step. We can do the best to fix the issue that WD My Passport not showing up on Mac Desktop/Finder/Disk Utility. Or we will help you recover lost data from the damaged drive.
Why isn't My Passport drive showing up on Mac?
There are a variety of reasons why your external hard drive, flash drive, USB drive, or SSD might not be showing up. Sometimes, your WD My Passport external drive not showing up on Mac just because the cable or port on the computer is bad. Or any other reasons will lead to the issue. We will show you the possible reasons as follows.
- Faulty USB cable or port.
- System failure.
- File system is not compatible with Mac.
- macOS update issue.
- Virus infection.
- Motherboard issue.
- WD My Passport drive damage.
How to fix a drive that won't show up on a Mac
Here we will troubleshoot the issue one bye one as follows and try to fix the issue. Then we may be able to identify the cause and fix the problem hopefully. After that, you would be able to access your WD My Passport external drive and get your data back without problem.
1. Check and change the system preferences.
One possible reason is that the system preferences are not configured correctly. Please first try to check if the system preferences are set to show mounted drives on the desktop.
1)Click on Finder in the menu at the top of the screen on Mac.
2)Choose Preferences > General, please check and ensure External Drives option is ticked.
If the settings are configured correctly and the WD My Passport external drive is still not showing up on the desktop, please then do as follows and continue checking the issue.
2. Check the cable and port.
First, please check the ports on both the external drive case and the Mac. You can change the ports to have a try first. If it doesn't work, then it might be the issue of the cable.
Simply, please just change a new cable to make sure the cable is not faulty. Also, if you change the cable but the issue persist. Please also check if the power is enough. If not, the external drive will also not be mounted normally. If you have a cable that splits into 2 USB connectors, please plug both connectors to your Mac to make sure it has enough power supply. If possible, you can try a USB hub/adaptor that has standalone power supply.
3. Try another Mac and then try a PC.
Sometimes, there is problem with the the Mac. So the next step is to plug your WD My Passport external drive to another Mac. If it still cannot be mounted normally on another Mac, then you will know that there is a problem with the drive.
There is another possible reason is that the format of your WD My Passport external drive is not compatible with Mac. So the next step is to try plugging the drive into a PC. If the drive can be mounted and accessed normally on the PC, then the problem is that the format of the drive is only for PC but not for Mac.
4. Check and fix the disk in Disk Utility
If after checking and you find the issues is really related to the WD My Passport external drive, then you can try to fix the drive issues in Disk Utility. Please do as follows step by step to accomplish the task.
Open Disk Utility and check the left panel to see if the WD My Passport external drive appears there. If you can see the drive in Disk Utility, please check the volume on the disk. Please choose the volume and try to mount it.
If there is no volume listed your Mac, it is not able to access the drive then. The Mount option will be greyed out.). In such a case, Disk Utility see your external disk, your options are First Aid, Erase and Restore. First Aid will check the disk for errors and then try to repair the disk if necessary. This is the option to choose for you. Click the First Aid tab and select Run.
If after running First Aid the Mac finds errors you could fix, you may see the option to Repair Disk. If you do, go ahead and run the repairs.
Note: If you still need the data on the damaged drive, please don't choose the Restore and Erase option. It will cause further damage to the lost data on the disk. We suggest you recover the lost data first. We will share the guide about how to recover lost data later. Please keep reading on.
5. Recover lost data from not showing disk.
If there are important data on the not showing disk, you may want to recover lost data first before repairing the hard disk issue. You can try one of the best Mac data recovery applications in the market. Here we will share you one of the software and tell you how to do the recovery step by step.
TogetherShare Data Recovery for Mac is the software we suggest for you. With this easy-to-use software, you are able to recover lost data from not showing up WD My Passport external hard drive or any other types of devices, including USB key, SSD, memory card, internal hard disk, etc.
Here is a simple and quick tutorial of the software. Only a few easy steps needed, you can get back lost data from the damaged drive effectively.
Step 1. Download the software.
Please download the trial version to scan and check if it works for you before recovering data. Here is the download available for you.
TogetherShare Data Recovery for Mac
Powerful & easy-to-use data recovery software
Step 2. Connect and select the disk.
Connect the disk to the Mac first. Please run the software from Launchpad and select the WD My Passport external hard drive in the device list. Click the Scan button to continue.
Step 3. Scan the disk.
The software will scan the disk automatically. With different data recovery methods and technology, the software is able to help you check and find the lost data effectively.
Ste 4. Preview and recover data.
After the scan is finished, you will find all the found files are listed for check. Preview the files to identify the wanted files first. Then choose the files to recover to another drive.
What's more, if you want to recover lost data in other cases - such as deleted files by accidental, reformat hard drive wrongly, deleted/lost partition, and so on - you can also try to use this software to recover the lost data. It can recover lost photos, videos, documents and other files on any digital storage devices.
6. Format the drive to fix the issue.
If your WD My Passport external hard drive is formatted using a file system that the Mac cannot read, or it is corrupted, you can try to reformat it directly to fix the issue. Of course, we suggest you follow the above tutorial about recovering data from a damaged disk to recover data first if necessary. Then you can try to reformat the drive.
Before reformatting the disk, please check and ensure to check the file system that can be read on Mac. Here's a bit of background on file formats: Mac computers, prior to Sierra, used the HFS+ file format. The systems after Sierra use Apple File System (APFS). exFAT or the older FAT32 are formats that can also be read on Mac. If you want your external hard drive to be read by Macs and PCs, you need to format it using exFAT or the older FAT32.
Here's how to reformat your drive in Disk Utility so it can be read by Mac:
1) Open Disk Utility.
2) select the disk and click Erase.
3) Choose your format, give the drive a name.
4) Click on Erase and it will then reformat the drive.
We will also introduce another simple software to help you format the drive. It's TS DataWiper for Mac. You can download it first to have a try.
TS DataWiper for Mac
Then run it from Launchpad, choose Disk Format. You can see a format button. Just click Format button to format the hard drive.
We suggest this tiny tool for you because it can not only format the drive, but also with this application, you can even wipe the data permanently on any drives. If you want to erase some sensitive data from your drive, you can use it to do the job. However, please note that the wiped data is no longer recoverable, so please be careful to do this.
How to make sure your drive and data is safe?
We have final suggestion to make your WD My Passport external hard drive is more safe. Also, we will do our best to make that is more of a guard against this error happening again.
Actually, most drive issues are caused when the disk is removed without ejecting it properly. To make sure that your external drive doesn't become corrupted again in the future, please always unplug the disk properly after using it. Don't just unplug the USB cable directly. Please first eject the external hard drive in Desktop or Finder by right clicking the disk and choose Eject. Then you can unplug the WD My Passport external hard drive manually.
Besides, please ensure to check the status of your hard drive after a long time use. If the drive is overused, some issues will happen and cause data loss. Don't cut down power suddenly while the computer is running or the data is transferring between your devices.
No matter how, please just be careful to use your drives to avoid damage to the drive. More important, data is priceless, so please do the best as above to protect your drive and data.
Related Articles
Many users complained that their external hard drives are connected but not showing on computer or File Explorer the Windows 10/8/7. Some reported that the USB or external hard drive is not showing up on My Computer or File Explorer but showing in Disk Management. Others said that external hard drive shows in device manager but not disk management. To fix these external hard drive issues, this troubleshooting post will be helpful for you.
Case 1: External hard drive shows up in disk management but not file explorer
You may experience that your USB or external drive has been connected to the computer, but it is not showing in File Explorer or My Computer, but shows in Disk Management instead. Under this situation, it will be regarded as an unknown disk and shows the capacity to be 2048 GB in the Disk Management. To fix the problem, please try following methods.
Tip: If your external hard drive shows in device manager but not disk management, you can directly move to the case 2.
1. Assign a Drive Letter to the USB/Hard Drive
Sometimes, the drive might not have been assigned a drive letter by Windows so that USB or external hard drive cannot show on File Explorer but in Disk Management. In this case, you can try to assign a drive letter to the USB or external hard drive in Disk Management.
STEP 1. Navigate to 'Control Panel'> 'System and Security'> 'Administrative Tools'.
STEP 2. Choose 'Computer Management'. Provide an administrative passcode, if asked.
STEP 3. In Disk Management, find out the unlabeled hard drive and right-click on it to choose 'Change drive letter and paths.'
STEP 4. Click 'Add'> 'OK' to pick out the available drive letter.
STEP 5. If the drive letter does not show on the drive, check if the drive is offline. If it is, right-click the disk number and select Online. And then, follow the instructions again.
NOTE:
If you can't finish the operation in Disk Management, you are able to run 'cmd' to change or assign the drive letter.
Open Command Prompt. (CMD) and type 'diskpart'.
At the DISKPART prompt, enter 'list volume'. ( mark down the number of the simple volume whose drive letter you want to assign)
At the DISKPART prompt, enter 'select volume n[volume's number]' (Select the volume whose drive letter you want to assign)
At the DISKPART prompt, enter 'assign letter=N' (N stands for the drive letter you want to assign)
https://nuikaguarque1974.mystrikingly.com/blog/downie-2-5-5-download-free.
2. Make sure that the hard drive is enabled and online
Make sure the hard drive is enabled
If the drive has been disabled, the disk will be invisible in File Explorer. When the disk is disabled, follow the steps below to Enable it:
STEP 1. Press 'Windows'+ 'R' on the keyboard to activate run box.
STEP 2. Type 'devmgmt.msc' on the run box to open 'Device Manager'.
STEP 3. If a drive is disabled, the disk drive will be marked with a down arrow. Locate the hard drive you want to enable.
STEP 4. Right-click on it and choose 'Properties'> 'View'tab.
STEP 5. Click on 'Enable Device' button > 'OK'.
STEP 6. After that, check if the down arrow is still there.
Make sure that the drive is online
Sometimes, an external hard drive connected but not showing because the drive is offline. To be detected by Windows, you can follow steps below to check the current status of the disk.
Go to 'Control Panel'> 'System and Security'> 'Administrative Tools'.
Choose 'Computer Management', and locate your disk in 'Disk Management'.
Right-click on it and select 'Online'.
3. Update drivers for USB or external hard drive Unpack 7z mac.
Sometimes, there is problem with the the Mac. So the next step is to plug your WD My Passport external drive to another Mac. If it still cannot be mounted normally on another Mac, then you will know that there is a problem with the drive.
There is another possible reason is that the format of your WD My Passport external drive is not compatible with Mac. So the next step is to try plugging the drive into a PC. If the drive can be mounted and accessed normally on the PC, then the problem is that the format of the drive is only for PC but not for Mac.
4. Check and fix the disk in Disk Utility
If after checking and you find the issues is really related to the WD My Passport external drive, then you can try to fix the drive issues in Disk Utility. Please do as follows step by step to accomplish the task.
Open Disk Utility and check the left panel to see if the WD My Passport external drive appears there. If you can see the drive in Disk Utility, please check the volume on the disk. Please choose the volume and try to mount it.
If there is no volume listed your Mac, it is not able to access the drive then. The Mount option will be greyed out.). In such a case, Disk Utility see your external disk, your options are First Aid, Erase and Restore. First Aid will check the disk for errors and then try to repair the disk if necessary. This is the option to choose for you. Click the First Aid tab and select Run.
If after running First Aid the Mac finds errors you could fix, you may see the option to Repair Disk. If you do, go ahead and run the repairs.
Note: If you still need the data on the damaged drive, please don't choose the Restore and Erase option. It will cause further damage to the lost data on the disk. We suggest you recover the lost data first. We will share the guide about how to recover lost data later. Please keep reading on.
5. Recover lost data from not showing disk.
If there are important data on the not showing disk, you may want to recover lost data first before repairing the hard disk issue. You can try one of the best Mac data recovery applications in the market. Here we will share you one of the software and tell you how to do the recovery step by step.
TogetherShare Data Recovery for Mac is the software we suggest for you. With this easy-to-use software, you are able to recover lost data from not showing up WD My Passport external hard drive or any other types of devices, including USB key, SSD, memory card, internal hard disk, etc.
Here is a simple and quick tutorial of the software. Only a few easy steps needed, you can get back lost data from the damaged drive effectively.
Step 1. Download the software.
Please download the trial version to scan and check if it works for you before recovering data. Here is the download available for you.
TogetherShare Data Recovery for Mac
Powerful & easy-to-use data recovery software
Step 2. Connect and select the disk.
Connect the disk to the Mac first. Please run the software from Launchpad and select the WD My Passport external hard drive in the device list. Click the Scan button to continue.
Step 3. Scan the disk.
The software will scan the disk automatically. With different data recovery methods and technology, the software is able to help you check and find the lost data effectively.
Ste 4. Preview and recover data.
After the scan is finished, you will find all the found files are listed for check. Preview the files to identify the wanted files first. Then choose the files to recover to another drive.
What's more, if you want to recover lost data in other cases - such as deleted files by accidental, reformat hard drive wrongly, deleted/lost partition, and so on - you can also try to use this software to recover the lost data. It can recover lost photos, videos, documents and other files on any digital storage devices.
6. Format the drive to fix the issue.
If your WD My Passport external hard drive is formatted using a file system that the Mac cannot read, or it is corrupted, you can try to reformat it directly to fix the issue. Of course, we suggest you follow the above tutorial about recovering data from a damaged disk to recover data first if necessary. Then you can try to reformat the drive.
Before reformatting the disk, please check and ensure to check the file system that can be read on Mac. Here's a bit of background on file formats: Mac computers, prior to Sierra, used the HFS+ file format. The systems after Sierra use Apple File System (APFS). exFAT or the older FAT32 are formats that can also be read on Mac. If you want your external hard drive to be read by Macs and PCs, you need to format it using exFAT or the older FAT32.
Here's how to reformat your drive in Disk Utility so it can be read by Mac:
1) Open Disk Utility.
2) select the disk and click Erase.
3) Choose your format, give the drive a name.
4) Click on Erase and it will then reformat the drive.
We will also introduce another simple software to help you format the drive. It's TS DataWiper for Mac. You can download it first to have a try.
TS DataWiper for Mac
Then run it from Launchpad, choose Disk Format. You can see a format button. Just click Format button to format the hard drive.
We suggest this tiny tool for you because it can not only format the drive, but also with this application, you can even wipe the data permanently on any drives. If you want to erase some sensitive data from your drive, you can use it to do the job. However, please note that the wiped data is no longer recoverable, so please be careful to do this.
How to make sure your drive and data is safe?
We have final suggestion to make your WD My Passport external hard drive is more safe. Also, we will do our best to make that is more of a guard against this error happening again.
Actually, most drive issues are caused when the disk is removed without ejecting it properly. To make sure that your external drive doesn't become corrupted again in the future, please always unplug the disk properly after using it. Don't just unplug the USB cable directly. Please first eject the external hard drive in Desktop or Finder by right clicking the disk and choose Eject. Then you can unplug the WD My Passport external hard drive manually.
Besides, please ensure to check the status of your hard drive after a long time use. If the drive is overused, some issues will happen and cause data loss. Don't cut down power suddenly while the computer is running or the data is transferring between your devices.
No matter how, please just be careful to use your drives to avoid damage to the drive. More important, data is priceless, so please do the best as above to protect your drive and data.
Related Articles
Many users complained that their external hard drives are connected but not showing on computer or File Explorer the Windows 10/8/7. Some reported that the USB or external hard drive is not showing up on My Computer or File Explorer but showing in Disk Management. Others said that external hard drive shows in device manager but not disk management. To fix these external hard drive issues, this troubleshooting post will be helpful for you.
Case 1: External hard drive shows up in disk management but not file explorer
You may experience that your USB or external drive has been connected to the computer, but it is not showing in File Explorer or My Computer, but shows in Disk Management instead. Under this situation, it will be regarded as an unknown disk and shows the capacity to be 2048 GB in the Disk Management. To fix the problem, please try following methods.
Tip: If your external hard drive shows in device manager but not disk management, you can directly move to the case 2.
1. Assign a Drive Letter to the USB/Hard Drive
Sometimes, the drive might not have been assigned a drive letter by Windows so that USB or external hard drive cannot show on File Explorer but in Disk Management. In this case, you can try to assign a drive letter to the USB or external hard drive in Disk Management.
STEP 1. Navigate to 'Control Panel'> 'System and Security'> 'Administrative Tools'.
STEP 2. Choose 'Computer Management'. Provide an administrative passcode, if asked.
STEP 3. In Disk Management, find out the unlabeled hard drive and right-click on it to choose 'Change drive letter and paths.'
STEP 4. Click 'Add'> 'OK' to pick out the available drive letter.
STEP 5. If the drive letter does not show on the drive, check if the drive is offline. If it is, right-click the disk number and select Online. And then, follow the instructions again.
NOTE:
If you can't finish the operation in Disk Management, you are able to run 'cmd' to change or assign the drive letter.
Open Command Prompt. (CMD) and type 'diskpart'.
At the DISKPART prompt, enter 'list volume'. ( mark down the number of the simple volume whose drive letter you want to assign)
At the DISKPART prompt, enter 'select volume n[volume's number]' (Select the volume whose drive letter you want to assign)
At the DISKPART prompt, enter 'assign letter=N' (N stands for the drive letter you want to assign)
https://nuikaguarque1974.mystrikingly.com/blog/downie-2-5-5-download-free.
2. Make sure that the hard drive is enabled and online
Make sure the hard drive is enabled
If the drive has been disabled, the disk will be invisible in File Explorer. When the disk is disabled, follow the steps below to Enable it:
STEP 1. Press 'Windows'+ 'R' on the keyboard to activate run box.
STEP 2. Type 'devmgmt.msc' on the run box to open 'Device Manager'.
STEP 3. If a drive is disabled, the disk drive will be marked with a down arrow. Locate the hard drive you want to enable.
STEP 4. Right-click on it and choose 'Properties'> 'View'tab.
STEP 5. Click on 'Enable Device' button > 'OK'.
STEP 6. After that, check if the down arrow is still there.
Make sure that the drive is online
Sometimes, an external hard drive connected but not showing because the drive is offline. To be detected by Windows, you can follow steps below to check the current status of the disk.
Go to 'Control Panel'> 'System and Security'> 'Administrative Tools'.
Choose 'Computer Management', and locate your disk in 'Disk Management'.
Right-click on it and select 'Online'.
3. Update drivers for USB or external hard drive Unpack 7z mac.
When your USB/external drive does not show on file explorer on Windows 10/8/7, you can try to update its driver in Device Manager. As we know, an update is created to fix some glitches for the previous version so as to make USB or external drive showing on My computer again.
STEP 1. Press 'Windows'key + 'R'and enter 'devmgmt.msc' on the run box.
STEP 2. Open 'Device Manager'> Click the 'Scan for hardware changes' icon on the menu.
http://lbrphk.xtgem.com/Blog/__xtblog_entry/19203882-1password-individual#xt_blog. STEP 3. Right-click on the inaccessible USB/external hard drive and choose 'Update Driver Software.'.
External Hard Drive
STEP 4. After the update is finished, restart your PC and check if the device is accessible.
4. Recover data from hard drive that is not showing
When external hard drive issue occurs, an external hard drive is not showing files though they still exist. If any important data is in the USB/external hard drive when external hard drive shows up in Disk Management but not File Explorer, you can employ data recovery to retrieve your data before formatting it. Here we highly recommend you FonePaw Data Recovery which is capable of recovering data from USB/ external hard drive, supporting Window 10/8/7. To recover data from hard drive, you just need few simple steps.
Download
STEP 1. Run FonePaw Data Recovery, and then, select the file types you need.
STEP 2. Next, click on 'Scan' button after selecting your USB/external drive.
STEP 3. Select out the files you want to recover.
STEP 4. Finally, click on 'Recover' button to finish data recovery.
STEP 5. After that, you can keep on formatting your inaccessible USB/external hard drive.
Case 2: External hard drive shows up in Device Manager but not Disk Management or File Explorer
Unlike case 1, USB or external hard drive sometimes is invisible in File Explorer or Disk Management, but it can be detected in Device Manager, for example, an external HDD won't show up in explorer, but it shows in Device Manager. To fix the issue, several methods can be listed below.
1. Make sure the USB or external hard drive is available. If it is not showing up in Disk Management or File Explorer, you can try to plug it into other USB port of your computer. What's more, you can connect your external drive to other computers to check if it works.
2. Partition and format the external hard drive.
Go to 'Computer Management'. > Right-click on black bar of the invisible drive to choose 'New Partition.'> Follow the instruction to finish the Partition.
Right-click on the drive and select 'Format'.
Western Digital
3. Disable and re-enable the USB controller.
Wd Passport Not Recognized Mac
Navigate to 'Device Manager'. > Find 'Unknown USB Device' and right-click on it. > Choose 'Uninstall'.
After restarting your PC, enable the USB controller again.
Open My Passport Hard Drive
Now, your issue - external hard drive not showing Windows 10/8/7 has been resolved. To manage the data on USB/external hard drive, read here:
